close
close

How To Weld Cast Iron With A Mig Welder


How To Weld Cast Iron With A Mig Welder. If you’re welding up a machined surface, the best option would be to tig weld it. Also, you can use stick, tig, and even mig welding, so you’ll need to decide based on the welding machine you have in your possession.

Mig Weld Cast Iron? from www.practicalmachinist.com

However, no preheating will always make the casting weaker next to the weld and more prone to cracking in the future. The studding method can be used for major breaks in large casings. But just as other methods, you’ve got to take note of some stuff before starting up the weld.

An Open Arc Process Such As Tig.

The idea is to weld in very short beads not exceeding 1/2, peaning immediately, & allowing to cool back to room temp. Whilst there are specialist flux cored wires available, unless you have a repeating application that you can create a procedure for, i would not advocate mig welding cast iron. I welded just about everything that was ever forged or cast and like i said you are the luckest person in the world.

I Let The Car Run For A Few Minutes And Then Let It Cool.

Beveling the fracture and 2. Groove out the crack, or bevel the pieces if they are separate, like you would normally prep it for stick electrode cold welding with nickle type rods (nicl or nife). Preheat the iron and let it cool down slowly;

Preheating The Cast Iron Part Before Welding Will Slow The Cooling Rate Of The Weld, And The Region Surround The Weld.

The spatter from mig or stick welding may unnecessarily damage parts of the machined surface not being welded. The process is also simple and gives the best results as expected. With a mig welder and the right wire, you can get cast iron metals welded.

(Oregon) For Grey Iron Cracked Casting Repairs.

Low and slow is the way to proceed when mig welding cast iron; If we have come across a machined surface to weld then the preference may be tig weld as the spatter from a stick and mig welding cast iron may damage the clean surface. Also, you can use stick, tig, and even mig welding, so you’ll need to decide based on the welding machine you have in your possession.

Then I Dabbed The Mig Wire In The Clean Area And Triggered It Right Up The Crack.

Tig welding is not considered a suitable process for welding cast iron. To prevent the workpiece from becoming hard and brittle (white cast iron), the cast iron should be hardened before welding and then slowly cooled down. Ensure you make use of the right filler wire for starters.

Tags: , ,

Leave a Reply

Your email address will not be published.